A 2006-P dime graded MS67 Full Bands sold for $426 — yet the coin in your pocket is worth just 10 cents. The difference comes down to three things: mint mark, condition, and whether the torch bands on the reverse are fully struck. This free guide covers all of it.
Use this table for a fast scan of all six varieties across all condition tiers. For a deeper look at grading each variety and what separates good from gem, check out this complete 2006 Roosevelt dime identification breakdown with photos and grading notes. The Full Bands row is highlighted gold — that designation alone can 3× a coin's value at MS-65 and above.
| Variety | Worn / Circ | MS-63/64 | MS-65/66 | MS-67+ | Tier |
|---|---|---|---|---|---|
| 2006-P (Philadelphia) | $0.10 | $2 – $5 | $7 – $10 | $30 – $75 | Common |
| 2006-D (Denver) | $0.10 | $2 – $5 | $7 – $10 | $25 – $75 | Common |
| 2006-P Full Bands (FB) ★ | $0.35 – $0.70 | $10 – $15 | $20 – $35 | $100 – $426+ | Valuable |
| 2006-D Full Bands (FB) ★ | $0.35 – $0.70 | $10 – $15 | $20 – $35 | $33 – $282+ | Valuable |
| 2006-S Clad Proof DCAM | — | — | $4 – $8 | $10 – $13 | Modest |
| 2006-S Silver Proof DCAM ☆ | — | — | $6 – $12 | $15 – $20+ | Rare (error) |
★ = Full Bands designation row · ☆ = Silver Proof row (additional melt value floor ~$3–$5) · Values based on PCGS auction data and market comparables.
📱 CoinHix lets you snap a photo of your 2006 dime and cross-check the value estimate against current market data instantly — a coin identifier and value app.
Jump to any section of this guide:
Over 2.8 billion 2006 Roosevelt dimes were struck across Philadelphia and Denver, which means die fatigue and mechanical errors were inevitable. While PCGS and NGC recognize no major die varieties for this date, several confirmed minting errors regularly surface in the marketplace and command strong collector premiums. Each card below covers one distinct error type — learn what to look for and what it's worth.
An off-center strike occurs when the planchet is misaligned inside the collar at the moment of striking, causing the design hubs to impress only partially onto the coin's surface. The 2006 business-strike run's high-speed production increases the statistical likelihood of these alignment failures, and a small number of off-center examples have survived into collector hands.
Visually, you'll see the Roosevelt portrait and inscriptions shifted toward one side, with a crescent-shaped blank area of raw planchet exposed on the opposite side. The value scales directly with severity: a 10% off-center strike brings a modest premium, while 30–50% off-center coins fetch $150–$300+ at major auction houses. Critical requirement: the date must remain fully readable for maximum value.
Collectors prize dramatic examples because each coin presents a unique composition. High-grade off-center strikes (MS-64 and above) with strong remaining design elements command the steepest premiums, as the combination of condition and dramatic error is uncommon.
The 2006 Roosevelt dime is a three-layer clad coin — a pure copper core sandwiched between two outer layers of 75% copper and 25% nickel alloy. When the bonding process at the planchet fabricator fails before the blank reaches the press, one or both outer layers separate, leaving the orange-red copper core exposed on the affected face. This is a genuine production defect, not post-mint damage.
On the affected side, the design appears normal in shape and relief but will be a distinctive reddish-orange rather than the usual silver-gray. The coin will also weigh noticeably less than the standard 2.27 grams — a missing obverse clad layer reduces weight by roughly 0.3–0.4 grams. Use a precise digital scale to confirm; post-mint acid exposure can mimic the appearance but won't change the weight.
Genuine missing clad layer errors command consistent premiums because they're visually dramatic and require planchet fabrication failure rather than press error. Full-face missing clad layer examples (where the entire side is bare copper) are scarcer and fetch more than partial separations or laminations.
A true doubled die error results from hub doubling during the die manufacturing process, where the working die receives two or more hub impressions at slightly different rotational or lateral positions. This creates distinct, separated design elements in the final die — and every coin struck from that die carries the same doubling. This is categorically different from mechanical doubling (machine doubling), which is a worthless strike artifact with no numismatic premium.
On a genuine 2006 doubled die dime, you'll see separated, shelf-like doubled outlines on design elements — most commonly on "LIBERTY," "IN GOD WE TRUST," Roosevelt's eye or ear, or on the reverse torch bands and inscriptions. True hub doubling shows notched, raised outlines with clear depth; mechanical doubling produces flat, shelf-like shadows with no raised edge and adds zero value.
Confirmed doubled die examples for 2006 are not formally catalogued by CONECA or PCGS as major varieties, meaning they're identified case by case. When certified by PCGS or NGC with the doubled die notation, collector demand is strong, particularly for examples with spread visible to the naked eye at arm's length.
A strike-through error occurs when a foreign object — a wire, cloth fiber, grease, or metal fragment — is caught between the die face and the planchet at the moment of striking. The object prevents full metal flow in the affected area, leaving an incuse (recessed) impression of the obstruction on the coin's finished surface. Die grease fill-ins are the most common type and the least valuable; hard-object strike-throughs are scarcer and more desirable.
Visually, a hard-object strike-through creates a clearly defined incuse shape on the coin — often identifiable as a wire, staple, or screw thread. The surrounding design remains fully struck at its correct relief, and the impression's edges are sharp and clean, distinguishing it from post-mint gouges that have rough, displaced metal edges. Under a 10× loupe, the bottom of the impression will appear polished (from die pressure) rather than scratched.
The value of a strike-through depends heavily on the dramatic quality and identifiability of the obstruction. A sharp wire strike-through covering a major design element like Roosevelt's portrait commands a premium, while a small grease fill-in on a peripheral area is worth only a few dollars. High-grade (MS-64+) examples with clearly identifiable obstructions are the most collected.
A collar clash (also called a die clash) occurs when the obverse and reverse dies strike each other without a planchet between them. This transfers a faint, mirror-image impression of each die's design onto the opposing die face. Coins subsequently struck from the clashed dies carry ghost-like transferred images from the opposite face, most visible near the rim where relief elements are highest.
On a 2006 clashed dime, look for faint reversed lettering or portions of the torch from the reverse appearing on Roosevelt's portrait side near the rim, or ghosted cheek and hair elements appearing on the reverse near the torch. These features are typically very low relief and require a 10× loupe and good raking light to distinguish from normal contact marks. Strong clashes — where the transferred image is clearly visible — are the most desirable and command the highest premiums.
Collar clash errors are distinct from planchet or strike errors in that they originate in the die itself, so an entire run of coins from those clashed dies carries the same features. The value spectrum depends on clash strength, strike quality, and grade — stronger, sharper clashes in MS-65 or above routinely achieve $75–$150 in specialist auctions, while minor clashes add only modest premiums.
Run it through the calculator — select your mint mark, condition, and check the matching error box to get an instant value estimate.
The 2006 Roosevelt dime series spans six distinct varieties across three mint facilities. Business strikes dominate the count by a massive margin — over 2.8 billion coins between Philadelphia and Denver alone — making circulated examples essentially worth only face value. Condition rarity (rather than mintage rarity) drives all premium value in this series.
| Variety | Mint | Mintage | Strike Type | Notes |
|---|---|---|---|---|
| 2006-P | Philadelphia | 1,381,000,000 | Business Strike | Common in all circulated grades; premium only at MS-67+ |
| 2006-D | Denver | 1,447,000,000 | Business Strike | Highest single-mint mintage; PCGS auction record MS68FB $282 |
| 2006-P Satin | Philadelphia | 847,361 | Satin Finish (SP) | Issued in 2006 Uncirculated Mint Set; distinctive matte texture |
| 2006-D Satin | Denver | 847,361 | Satin Finish (SP) | Issued in 2006 Uncirculated Mint Set; same mintage as P Satin |
| 2006-S Clad Proof | San Francisco | 2,000,428 | Clad Proof (DCAM) | Included in standard 2006 Proof Set; mirror field, frosted devices |
| 2006-S Silver Proof | San Francisco | 1,054,008 | Silver Proof (DCAM) | 90% silver; melt value floor ~$3–$5; scarcer than clad proof |
| Total All Varieties | ~2,833,056,158 | Business strikes dominate; collector issues combined ~5M | ||
Grading a 2006 clad dime focuses on three areas: the hair detail above Roosevelt's ear, the cheek below his eye, and the torch bands on the reverse. All premium value for this date lives in uncirculated grades — any wear at all puts a 2006 dime in the face-value category.
Roosevelt's hair is flat across the top of the head with little separation between individual locks. The cheek below the eye is smooth. On the reverse, the torch bands are merged and the flame lines are barely visible. These coins are worth exactly face value: 10 cents.
Hair detail is partially visible but high points above the ear are flat. The cheek shows some texture but lacks full mint sharpness. The torch bands show slight flattening at their centers. At AU-58, just a hint of wear on the very highest points — still worth only $0.10 to $1, but closer to uncirculated.
No wear anywhere; full cartwheel luster when tilted under light. Contact marks from bag handling may be visible but cause no wear. MS-65 examples show only a few light blemishes under magnification. Strike quality becomes critical here — weakly struck bands prevent the FB designation and limit value to $7–$10.
Exceptional luster with virtually no contact marks. At MS-67, even a single distracting mark drops the grade. The "cliff" in pricing begins here — MS-67 trades at $30–$75, while MS-67 Full Bands has sold for over $300. MS-68 is very rare and any example should be professionally certified by PCGS or NGC.
🔍 CoinHix can match your coin photo against graded reference examples to help you estimate where your 2006 dime falls on the Sheldon scale — a coin identifier and value app.
The Full Bands designation is the single most important value driver for 2006 Roosevelt dimes. Use this quick visual guide to assess whether your coin might qualify — then verify the checklist below.
The horizontal bands wrapping the torch appear merged or flattened in the center. Under a 10× loupe, you'll see the upper and lower band segments blending together rather than showing a clean gap between them. These coins grade as standard MS regardless of how sharp the rest of the design looks. At MS-65, a standard strike sells for approximately $7.
Every horizontal band across the torch shows complete, unbroken separation with a visible gap between the upper and lower band segments across the entire width of the torch — no merges, no weak spots anywhere. Under a 10× loupe, the gap reads as a clear, dark channel. A 2006-P MS67 FB sold for $426, and MS65 FB examples regularly fetch $15–$25, compared to just $7 for a standard MS65.
Check all four that apply to your coin:
Enter your mint mark, condition, and any error features into the calculator for an instant personalized value estimate.
Open the Calculator →Select your mint mark, grade your coin's condition, and check any errors to get an instant value estimate. All values based on PCGS and Heritage Auctions data.
If you're not yet sure which mint mark or condition your coin has, try the 2006 Dime Coin Value Checker tool — it's a free third-party identifier that works from photos of your coin.
Not sure which category fits? Type a plain-language description of your coin and the analyzer will pick out the key features and give you tailored feedback.
The right venue depends on your coin's value tier. A $7 MS-65 doesn't justify auction fees; a $300+ MS-67 FB absolutely does. Here's where to look for each tier.
The top destination for MS-67+ and Full Bands examples. Heritage regularly handles high-grade Roosevelt dimes and reaches the deepest pool of serious buyers. The 2006-D MS68 sold for $282 here in December 2014. Best for coins worth $100+ where auction exposure maximizes price. Consignment fees apply but are offset by competitive bidding.
Ideal for mid-range uncirculated and error examples in the $10–$150 range. The record $426 sale for a 2006-P MS67FB was set on eBay via a PCGS-certified listing. Check recent sold prices for 2006-P Roosevelt dimes to price your listing competitively. Always sell certified coins in their PCGS or NGC holders — buyers pay premiums for slabbed examples.
Fast and convenient for face-value coins or modest MS-64 and below examples. Dealers typically pay 50–70% of retail for common dates, so a $7 MS-65 might net $3–$4. The advantage is immediate cash with no shipping or listing hassle. Shops are excellent for circulated rolls or Satin Finish examples from mint sets.
The r/Coins4Sale and r/CoinSales subreddits offer direct peer-to-peer sales with no platform fees. Good for mid-range error coins ($25–$100) where you can show close-up photos and let collectors judge authenticity. Responses from knowledgeable hobbyists can also help you confirm whether your error is genuine before committing to a sale venue.
If your 2006 dime appears to be MS-66 or higher, or shows a clear error, consider submitting to PCGS or NGC before selling. Certification costs $20–$40 per coin but can add $50–$200+ to the realized price for a Full Bands or error specimen. Graded coins in slabs also sell significantly faster online because buyers can trust the stated grade.
The free calculator takes under 60 seconds — no signup, no fees, instant results.
Get My Value Now →